So, the first stage box’s inputs will occupy AES50 1-8, 1-16, or 1-32, respective to its number of inputs. Just remember that each X32 has a limited number of channel strips (32) and analog outputs.ĪES50 input channelsWhen connecting to an X32’s AES50 port, the stage box’s built-in inputs will be assigned to their respective AES50 channels. Or, cascade an S16 with an S32 and you have 48 mic preamps and 24 analog outputs. Use two S16’s and you’ll have 32 mic preamps and 16 analog outputs. For example, a single S16 offers 16 inputs and 8 outputs. That’s a lot of channels, meaning you can configure a variety of setups. Follow the sections below to learn a few ways to connect Behringer stage boxes.Įach X32 AES50 port supports 48 input and 48 output channels and can each connect to up to three stage boxes at a time. Once connected, you just need to configure each device’s settings for your particular setup. The main difference is that Behringer’s digital stage boxes only require a single shielded Cat5-e networking cable to connect to your X32 mixer’s AES50 ports. Digital stage boxes function just like analog snakes: they pass audio in two directions over a long cable (snake). In this article/guide, we will show you how to set up digital stage boxes ( SD8, SD16, S16, and S32) with an X32.
